PRI Enabler

[bfitz8339]

What is the lowest software verision for useing PRI???

 

[senk1s]

4.1

 

[edmonton2]

4.0

Release 1.0 1994
Initial release.
• New platform. Expandability from 4x8 to 8x24.
• Trilingual software.
Release 1.1 1996 Integrated Companion. Expandability to 272 ports.
Release 2.0 1997 Introduced BRI connectivity.
Release 3.0 1998 Introduced IDM 2000 (MD April 2000).
Release 4.0 1999 Introduced PRI connectivity.
Release 4.1 1999 Call feature enhancements and introduced NDI connectivity
Release 4.1.1 2000 Introduced MWI on BSTs.
Release 5.0 2001 Introduced private networking to M1.
Release 6.0 2002 Introduced private networking Norstar to Norstar and third DTI.
Release 6.1 2003
Call feature enhancements and T7316E and T24 compatibility.
• Expandable from 4 lines and 32 stations to 248 ports
• Supports CLID, BRI, T1, PRI, DID, and E&M trunks
• Compatible with all Norstar applications such as Voice Mail,
ACD, CTI
• New feature capabilities provided with CallPilot 100 and
CallPilot 150
• Automatic Daylight Savings clock adjustment
• External call forwarding
• Automatic Route Selection
• Alternate Restrictions
• Hunt Groups
• System Wide Call Appearances
• 255 System Speed Dials
• Analog Station Module connectivity
• Norstar to M1 and Norstar to Norstar networking to provide
centralized voice mail and attendant capabilities
• Silent Monitor on Hunt Groups
• Support for T7316E and T24 KIM Module
• Display CLID while on a call
Release 7.0 2005 Introduced digital mobility solution. Expandability to 284 ports
(opening of expansion ports 13 and 14).

 

[senk1s]

if possible you'd want to be atleast at 6.1 (G10)

 

[RikRodgers]

If you've got a choice, go to 7.1 .

I've had one customer with strange PRI bugs on 6.1MR, too.

 

[exsmogger]

Most of the PRI's we've sold have been for R6.1 MR and few if any issues. Go at least that release, but I'd also recommend going with R7.1 as Rik posted.

Brian Cox

http://www.jandjcommunications.com

 

[jerryreeve]

a note to keep in mind is that on 6. software there is a problem with initializing PRI if you are connecting to a nortel DMS switch.

----------------------------
JerryReeve
Communications Systems Int'l
com-sys.com

 

[RikRodgers]

Isn't that ironic.

 

[jkupski]

I'll bet they had trouble getting the specs from the vendor.

 

[jerryreeve]

I couldn't beleive it myself till I saw the bug sheet

----------------------------
JerryReeve
Communications Systems Int'l
com-sys.com