PRI Channel Licenses on Legacy PRI Cards

[fedphone]

So, i have a PRI Card LEgacy on 4.2 and get 23 voice channels; if we move that card to a R5 or R6 then we get only 8 channels of voice.... just wondering why we dont get all 23 channels first of all and if we upgrade from 4.2 to 5 in the field would we get the additional channels? i suspect we dont...

I suspect i have to contact a distributor to get the licenses....

 

[tlpeter]

You should not need licenses.

BAZINGA!

I'm not insane, my mother had me tested!

 

[mforrence]

Legacy card gets you all channels without need for license. If it doesn't, then something else is amiss.

 

[fedphone]

without calling a distributor? as i remember on 4.2 there werent any PRI Licenses on the dongle - you install the PRI and get all 23 channels.... anyone remember that?

 

[IPGuru]

legacy IP400 pri cards do not require licences
all channels are active "out of the box" this remains the same when fitted to a legacy card carrier in an IP 500.


A Maintenance contract is essential, not a Luxury.
Do things on the cheap & it will cost you dear

 

[montyzummer]

be carefull though as you do not get all the features of a new pri card.

APSS (SME)
ACSS (SME)

 

[amriddle01]

You will find that mobile call control etc still work, not supported if you get issues but they do still work, or they did last time I tried R7 something

 

[gddoec]

There is no need to purchase a new card. Use the old PRI card. Order a Legacy Carrier from your distributor.