Port forward on a PIX 501

[defrag4]

I am attempting to forward port 13000 to 192.168.1.11

I have setup 2 rules, an access-list and a static rule, i cleared the xlate however I still cannot get to the port from the outside.

I checked internally and confirmed the port is open and available.

Can anyone see why this is not working?

access-lists
Code:

access-list fReal-VPN_splitTunnelAcl permit ip 192.168.1.0 255.255.255.0 any
access-list inside_outbound_nat0_acl permit ip 192.168.1.0 255.255.255.0 192.168.204.0 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any 192.168.0.0 255.255.255.0
access-list inside_outbound_nat0_acl permit ip any MO 255.255.255.0
access-list outside_cryptomap_dyn_20 permit ip any 192.168.204.0 255.255.255.0
access-list outside_access_in permit icmp any any
access-list outside_access_in permit udp host 207.145.49.38 host 216.216.113.139 eq snmp
access-list outside_access_in permit udp host 207.145.49.38 host 216.216.113.140 eq snmp
access-list outside_access_in permit tcp any host 192.168.1.11 eq 13000
access-list outside_access_in permit udp any host 192.168.1.11 eq 13000
access-list outside_cryptomap_10 permit ip any 192.168.0.0 255.255.255.0
access-list outside_cryptomap_30 permit ip any MO 255.255.255.0




statics
Code:

pixfirewall(config)# sh static
static (inside,outside) tcp interface 13000 192.168.1.11 13000 netmask 255.255.255.255 0 0
static (inside,outside) udp interface 13000 192.168.1.11 13000 netmask 255.255.255.255 0 0
static (inside,outside) 216.216.113.139 Switch-1 netmask 255.255.255.255 0 0
static (inside,outside) 216.216.113.140 Switch-2 netmask 255.255.255.255 0 0




nattys
Code:

nat (inside) 0 access-list inside_outbound_nat0_acl
nat (inside) 1 0.0.0.0 0.0.0.0 0 0

 

[defrag4]

Let me know if you need any more info on my config

 

[burtsbees]

You should post in the PIX forum...

http://www.tek-tips.com/threadminder.cfm?pid=35

/

tim@tim-laptop ~ $ sudo apt-get install windows
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Couldn't find package windows...Thank Goodness!