Scenario is as follows
192.168.10.0
|
Router Internet
| |
VPN Router
| |
Netscreen PIX 515
| |
LAN
Netscreen 192.168.0.2
PIX 192.168.0.1
Everyone on the lan interface uses the PIX as the default router. For some reason when i add
route inside 192.168.10.0 255.255.0.0 192.168.0.2 1 to the pix the clients cannot get to the 192.168.10.0 subnet using the PIX to route internally to the netscreen.
I am assuming that this is because the PIX cannot route packets on the same interface. Is this correct?
192.168.10.0
|
Router Internet
| |
VPN Router
| |
Netscreen PIX 515
| |
LAN
Netscreen 192.168.0.2
PIX 192.168.0.1
Everyone on the lan interface uses the PIX as the default router. For some reason when i add
route inside 192.168.10.0 255.255.0.0 192.168.0.2 1 to the pix the clients cannot get to the 192.168.10.0 subnet using the PIX to route internally to the netscreen.
I am assuming that this is because the PIX cannot route packets on the same interface. Is this correct?