PIX 501 configuration pb

[slhuillier]

I have just bought a PIX 501. The pix seems correctly configured as most of the traffic goes correctly. However, I have a route problem. To simplify my network, I just test the following configuration :

PIX 501
Inside address 192.168.1.250
<--> connected to a private lan A 192.168.1.0, Msk:255.255.255.0

Outside address 192.168.101.250, Msk:255.255.255.0
and GW 192.168.101.1
<--> connected to a private lan B 192.168.101.0 255.255.255.0
(with a router 192.168.101.1)


My PCs on the private lan A have their NIC configured as 192.168.1.x, 255.255.255.0, GW 192.168.1.250 (PIX inside addr) and the PCS on the private lan B have their NIC configured as 192.168.101.x, 255.255.255.0, GW 192.168.101.250 (PIX outside addr).

I'd like to &quot;ping&quot; a PC on lan A from a PC on lan B.
Do I have to configure a static route ?
How can I troubleshoot the traffic ?
Thanks.
SL

 

[themut]

Take a look at the link below it explains how the PIX handle ICMP traffic:

http://www.cisco.com/warp/public/110/31.html

 

[slhuillier]

Well, I simplified my problem and wrote 'I'd like to ping' but in fact the problem is a little bit more complex : I'd like to share files and folders.

 

[themut]

Well, how about this one:

http://www.cisco.com/warp/public/110/pixnetbios.html