PDM over VPN tunnel ?

[excuseme]

IS there a set-in-place method for accessing the PDM over an established VPN tunnel? https:/192.168.2.1/pdm.html only works while i am on a station inside the actual network and not while VPNing remotely.

 

[colinT23]

Hi,

Launch PDM on the PIX you wish to manage. On the System Properties page, expand 'Adminstration', click on 'Management Access'. Enable management access on the Internal interface.

Regards Colin.

 

[excuseme]

I am using the cisco VPN client to access a 506e. Everything works just fine when accessing the network from home. However, after I establish a tunnel from behind another PIX on some other business network, I can not ping any servers or IPs inside my office. any help?

 

[Tekmazter]

You need to make sure the 'other' pix is setup for ICMP ... otherwise you'll never get a response even though it's there.

 

[colinT23]

Have you enabled NAT Traversal on the Pix you are trying to connect to ?

Regards Colin.