PCI "B"

[RYLSFAN]

I have a customer that is using the PCI B card in an old pc. This PCI B card allows for them to store a directory on a pc and access it through the phone system by entering a feature code. We are looking at upgrading thier switch to a BCM 400 3.7 and want to make sure this PCI B card will still work. Anyone know where i should start?

Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[RYLSFAN]

NT5B65AA in case your a part numbers guy.


Thats not my fastball, thats my hurry up and get by you pitch... Satchel Paige

 

[deelee74]

I am unfamiliar with the PCI B card.
Is this the same thing as the CTA-160? The CTA-160 is the PCI version of the CTA-100 direct connect module. It allows you to run TAPI applications with the Norstar. I have a customer that uses the CTA-100 with a BCM-50 and it works just fine.
I would assume that since the BCM-400 runs on a Windows NT PC that has TAPI service enabled, you should be able to do whatever it is that you are doing with the PCI B card right off of the PBX itself.