Operator Diversion 1

[grinchstyle]

Hi Guys,

I've been trying over the last couple days to get my absent operator to divert but still no success. PELPI, CDINI commands dont work and OPADC. Any suggestion guys? I dont think a *21*ext# works either...

Thanks

 

[whosrdaddy]

show some commands:

NADAP:NUMTYP=OI&OD&OC;
OPDDPIR=ALL;
OPCTP:CORG=ALL;

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Satellite1900]

Hello,
Do you entered the command RODNI on incoming rou and also on internal calls?

 

[grinchstyle]

Here's the output of the commands.

<?NADAP:NUMTYP=OI&OD&OC;
NUMBER ANALYSIS DATA

TYPE OF SERIES NUMBER SERIES

OPERATOR INDIV. NUMBER SERIES 200

OPERATOR COMMON NUMBER SERIES 0

OPERATOR COM. DID. NUM. SERIES 1000


END

<?OPDDPIR=ALL;
OPERATOR DIRECTORY DATA

DIR EQU OCUST TYPE PCM REV
200 001-0-30-00 1 6 - -

END

<?OPCTP:CORG=ALL;
NOT ACCEPTED
CORG
NOT ASSIGNED


Thanks!

 

[Satellite1900]

You need to configure the corg with its calt for all types of calls, then entering the command opadc for service night.
For incoming calls also rodni.

 

[Satellite1900]

Follow this configuration:
OPCTS:CORG=1,CALT=1,OACC=0;
OPCTS:CORG=2,CALT=2,OACC=0;
OPCTS:CORG=3,CALT=3,OACC=0;
OPCTS:CORG=7,CALT=7,OACC=1000,ROU=(INCOMING ROU);
OPCGS:CORG=1,DIR=200,CHO=1;
OPCGS:CORG=2,DIR=200,CHO=1;
OPCGS:CORG=3,DIR=200,CHO=1;
OPCGS:CORG=7,DIR=200,CHO=1;
OPADC:CORG=1,NDIR=Y,RERNUM=(NUMBER OF NIGHT SERVICE);
OPADC:CORG=2,NDIR=Y,RERNUM=(NUMBER OF NIGHT SERVICE);
OPADC:CORG=3,NDIR=Y,RERNUM=(NUMBER OF NIGHT SERVICE);
OPADC:CORG=7,NDIR=Y,RERNUM=(NUMBER OF NIGHT SERVICE);
RODNI:ROU=(INCOMING ROU),NIG=(NUMBER OF NIGHT SERVICE);

This configuration is for all types of calls.
The night service is configured for both internal calls both for those entrants.
Try it and good luck ;-)

 

[grinchstyle]

Thanks a bunch! I'll try this out and let you know how it works..

 

[Hitechbuzz]

Hi grinchstyle
I did not see if you got this sorted
I use *24*(hunt group that calls are going to)eg8128*(phone thats are to terminate on)eg.8989#
So the commaned is *24*8128*8989#
then when I wish to restore it the command is #24*8128# This means that the operator can use a master phone if She loses the consul hope this helps
cheers Brian

Cheers Brian
To see is to know To Know is to see