bowlerroller
Technical User
in nortel world there is a mov cmd anything in nec ? tks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations gkittelson on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
nortel Vs NEC
- Thread starter bowlerroller
- Start date
- Status
belevedere
Instructor
Which NEC system? The key systems and the IPS system with MatWorX can do it. The 2400 cannot without using the MA-4000 maintenance tool. That's a pricy Administration server.
- Thread starter
- #3
OzzieGeorge
Programmer
not wanting to ask a silly question but wouldn't it help if you told us what the mov command does on the nortel?
- Thread starter
- #5
bowlerroller
Technical User
on a nortel you can move an ext/tn to a new tn with the move cmd. i had a customer that did a ton of phn moves set her up so all she needed to do was do the mov cmd and plug the phn in.
jkmullins007
Programmer
I work on Nortel and NEC and the mov command is a nice command and works great but the NEC product is a much more stable PBX than Nortel. I have never had software corruption on a NEC and Nortel is known for PEPS and corruptions...
OzzieGeorge
Programmer
Just a note, the 1000/2000/8300 ranges can do this using a feature called set relocation and it can be set up as a user feature. Similar to the alcatel!
- Status
