Night Service problem

[tapicomms]

I've spent hours trying to work this out.
We are have a Definity G3 Software Load:R012x.00.0.219.0.
I am unable to setup the night service.
When I do a 'change hunt-group 16' there is no Night Service Destination entry for HG 16

In "change console", There is no field for Night Service Act. Ext.

Is there someting that has not been enabled for night service to work

Thanks,

Glen

 

[jordy5535]

If the hunt group is vector controlled, there won't be a field for night service destination. You would need to put that into the vector.