I have another networking question, hopefully this one is easy. I have two Magix switches networked toghether. The one I have set as Legend NTW will not let me assign an operator. My problem with this is that I cannot assign true line appearance. Is there anything I can do. I am also unable to assign exensions into page groups for some reason.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Westi on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Networking with operator location on slave switch
- Thread starter gparent
- Start date
How do you have the Consoles at the locations setup as QCC or DLC?
Both have different ways that they are configured when you are networking Magix switches.
Have you read the Legend Network Reference? That document covers almost all of the items associated networking Legend and Magix switches. If you don't have it, you can download it from Avaya's web site: support.avaya.com All the documents and manuals are there for the download!
Hope this helps!
....JIM....
Both have different ways that they are configured when you are networking Magix switches.
Have you read the Legend Network Reference? That document covers almost all of the items associated networking Legend and Magix switches. If you don't have it, you can download it from Avaya's web site: support.avaya.com All the documents and manuals are there for the download!
Hope this helps!
....JIM....
- Status
Similar threads
- Locked
- Question
- Locked
- Question
- Locked
- Question