Hello,
First I know nothing about AIX. I run a small network for our company and we have one IBM machine with AIX and running some accounting software.
The problem is last week I installed a new hub and DSL router. This DSL router assigned new IP's to all the pc's. At the same time I lost contact to the IBM. I could not ping it, and the LED status on the hub means there is a problem with the network card. Well IBM came out and said the card is fine. But I still can communicate with it. The IBM can ping itself, and thats it.
Could I have screwed something up? Any ideas would be appreciated.
First I know nothing about AIX. I run a small network for our company and we have one IBM machine with AIX and running some accounting software.
The problem is last week I installed a new hub and DSL router. This DSL router assigned new IP's to all the pc's. At the same time I lost contact to the IBM. I could not ping it, and the LED status on the hub means there is a problem with the network card. Well IBM came out and said the card is fine. But I still can communicate with it. The IBM can ping itself, and thats it.
Could I have screwed something up? Any ideas would be appreciated.