need help for CIL 2

[Monrovia]

dear,

I need a help to know, whether my system is configured for call billing? because, I know,there is no ring master installed here, but, i doubt that some other type of call billing software is working here.

how can i find out, the data is sending out? I am using Ethernet port for call billing

SYSTEM IS : VERSION=CXP1010101/4/TSWSP07/SP07

<IODDP;
I/O DEVICE DATA
NODE            IODEV/SUBFS     BPOS/EQU    I/O-BUS TYPE/USAGE    STATUS    AUTH
SYSN            -               001-0-60    -       -             IN SERVICE    
SYSN            SYSDISK1        001-0-60-0  MASTER  SILICON       IN SERVICE    
                SYSSUBFS11
                SYSSUBFS21
SYSN            SYSTERMINAL     001-0-60-1  -       MML           -            7
SYSN            MML2            001-0-60-2  -       MML           -            7
SYSN            MML3            001-0-60-3  -       MML           -            7
SYSN            CILETH          001-0-60-4  -       NETWORK/OUT   IN SERVICE    
SYSN            TELNET6         001-0-60-4  -       NETWORK/MML   -            7
SYSN            TELNET5         001-0-60-4  -       NETWORK/MML   -            7
SYSN            TELNET4         001-0-60-4  -       NETWORK/MML   -            7
SYSN            TELNET3         001-0-60-4  -       NETWORK/MML   -            7
SYSN            TELNET2         001-0-60-4  -       NETWORK/MML   -            7
SYSN            TELNET1         001-0-60-4  -       NETWORK/MML   -            7
END

if i want to run this CIL into my telnet/winfiol, what is the procedure?

thanks

Monro

 

[whosrdaddy]

if i want to run this CIL into my telnet/winfiol, what is the procedure?
[code]

you can't, the PBX acts as a client and will connect to the server address defined in IONCP;

check these printouts:

IONCP;
CLDFP;
CLINP;
ALLOP;

/Daddy

-----------------------------------------------------
 What You See Is What You Get
Never underestimate tha powah of tha google!

 

[Monrovia]

hi daddy,
thanks for the info.
Crystal reports are programmed to collect the data, but it is not getting data from the system. So the billing unit has raised up the issue.

here is the printouts

<ALLIP;
ALARM LIST
IDENTITY: PCSD
VERSION: CXP1010101/4/TSWSP07/SP07

DATE: 07JUL10   TIME: 15:44:29
CODE  CLASS  NOAF   EXPLANATION
102     4    4      POWER FAILURE DETECTED BY DSU  
<IONCP;
NETWORKING CONNECTION
NODE/IODEV      LIM  USER            TYPE/CON   IP               PORT   PROC
SYSN            1                                                             
CILETH               CIL-3           CLIENT     10.180.57.22     5656         
END
 
<CLDFP;
        FILE ADMINISTRATION DATA 
<CLINP;
NOT ACCEPTED
NO HEADER ASSIGNED

the power failure was in the starting when one magazine was not connected to the system. and later the second magazine connected, but the alarm didnt go

 

[Monrovia]

oh dear!!!

i solved the problem.

i reprogrammed it with header other details! now it is working fine.

thanks daddy for the clue you give!

BR

Monro

 

[whosrdaddy]

A star for you for solving your own problem!

/Daddy

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!