MLS in Cat 6505

[tvsk]

I am trying to configure MLS in Cat 6506 with an external router c7206. I have the following h/w and s/w:
WS-X6K-SUP1A-2GE
HW 3.1
FW 5.3(1)
FW1 5.1(1)CSX
SW 5.3(2)CSX
SW1 5.3(2)CSX
WS-X6248-RJ-45
WS-X6101-OC12-MMF

In order to do it, I need to enter two commands &quot;set mls enable&quot; and &quot;set mls include <ip-address>&quot;. But no such command options are available in the my switch.

Does it need any hardware or software upgrade? Grateful if anyone could provide me some info on this.

 

[Guest_imported]

I think the command should be set mls multicast enable once mls is enable then
the set mls include command should work.....


This link may help

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_5_5/cmd_refr/set_m_pi.htm#1025255

 

[tvsk]

I found that the MSFC card is missing in the SUP1A engine. I believe adding that card will solve my problem.

Thanks.