Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Meridain Tele printer/writer 1

Status
Not open for further replies.

GobberWokkie

IS-IT--Management
Mar 15, 2010
12
GB
Hi all

I have a Meridian 1 option 11c land on lap to look after and tidy up. pretty much use to the command line now, but the one thing I would like to know if any one can help me is that I dont want to print the information of every time I need to check devices. is there a command to stop or pause the information flying of the screen and only displaying the end of my query ?
 
This is an optiono on your tty. Scroll through the options until you find printing. Ususally, I think it's F2 to suspend printing on a VT terminal. Then you press F2 to start printing again. Not 100% sure of the F key though

John Anaya
Signet6 Network Sciences
ACSS/ACIS - CS1000 Rls 7.5/Call Pilot 5
ACSS/ACIS - SME - IP Office 8.0
APSS/APDS - Avaya UC Services

Public Profile
 
Hi Janaya and John
Thanks for the info I will try this out later on today.
 
If it's a VT terminal then it's ctrl F2 to toggle printing off and on
 
Sorry I have been a bit stupit
on the key board it has a key for stop screen and one for print
but thanks to all for the advice
my next problem is voice mail
so fun and games there
 
Sorry I have been a bit stupit
there is a key on the keyboard for stop screen and print screen
so thanks to all for their advice
my next adventure is Meridian mail
so fun and games there
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top