telepath9465
IS-IT--Management
I have a strange system where I haven't seen this issue occur. Somehow, trunk group 1 has 3 PRI, one on each gateway of an S8300. The first is 001V3, the second is 002V5 and the last is 003V1. It would seem that wherever I place stations, determines which PRI that station uses for outbound calling. These 3 PRI are each independent in that each has it's own signaling group with no inter-dependencies. The trunk-group itself is set for descending and the outcalling does work in a descending way but on a per media-gateway basis. Can anyone tell me a setting that causes that effect? I would like to be able to control that function. Any help would be appreciated.