IPK External Paging

[itsthephoneman]

Can anyone help with this issue. I'm hooking up an external paging speaker to an IPK. Is it possible to use the ESP port (rca plug) on the side of the cabinet for this or do I need to use a trunk port. If the RCA plug can be used is there any programing that needs to be done?
Thank for your help.

 

[belevedere]

The port on the side will give you one zone of paging. You should not have to do any programming.

 

[itsthephoneman]

Thanks for the reply. Thats the way I see it but there is no audio output from that port. Just wwnted to make sure I wasn't missing something. I'll check the port itself next, maybe a bad port.