IP Office 9.1

[phone01]

Can any one help with translation

10:31:36 83529492mS PRN: WARNING:
10:31:36 83529492mS PRN: 0083529492 - DIM: 2:*, DSP BUSY -- No status response Message
10:31:36 83529492mS PRN:
10:31:36 83529492mS SPY: 0083529492 - DIM: 2:*, DSP BUSY -- No status response Message
10:31:36 83529492mS PRN: WARNING:
10:31:36 83529492mS PRN: 0083529492 - DIM: 2:*, BRINGING DSP DOWN (dependents also)!!
10:31:36 83529492mS PRN:
10:31:36 83529492mS SPY: 0083529492 - DIM: 2:*, BRINGING DSP DOWN (dependents also)!!
10:31:36 83529494mS PRN: WARNING:
10:31:36 83529494mS PRN: 0083529494 - DSP 2 Failure. Error: 7
10:31:36 83529494mS PRN:
10:31:36 83529494mS PRN: WARNING:
10:31:36 83529494mS PRN: TI VCM: DSP failed - core 2, error 7
10:31:36 83529494mS PRN:
10:31:36 83529494mS PRN: TI VCM: DSP core 2 failed - core failure count 5
10:31:36 83529494mS PRN: VCM DSP device failed, slot 1, device 1, core A, error count 5
10:31:36 83529495mS PRN: WARNING:
10:31:36 83529495mS PRN: 0083529495 - DSP 3 Failure. Error: -8
10:31:36 83529495mS PRN:
10:31:36 83529495mS PRN: WARNING:
10:31:36 83529495mS PRN: TI VCM: DSP failed - core 3, error -8
10:31:36 83529495mS PRN:
10:31:36 83529496mS PRN: TI VCM: DSP core 3 failed - core failure count 2
10:31:36 83529496mS PRN: VCM DSP device failed, slot 1, device 1, core B, error count 2
10:31:36 83529497mS PRN: WARNING:
10:31:36 83529497mS PRN: 0083529497 - CCU: 10, Channel Failure. State: 6
10:31:36 83529497mS PRN:
10:31:36 83529497mS SPY: 0083529497 - CCU: 10, Channel Failure. State: 6
10:31:36 83529497mS PRN: WARNING:
10:31:36 83529497mS PRN: TI VCM: CCU request coding failed, TCID 10, error -9
10:31:36 83529497mS PRN:
10:31:36 83529497mS PRN: WARNING:
10:31:36 83529497mS PRN: 0083529497 - XDP:tcid[10] - TCID can't be associated at DIM, NULL dsp and chan returned
10:31:36 83529497mS PRN:
10:31:36 83529497mS PRN: WARNING:
10:31:36 83529497mS PRN: 0083529497 - DIM config_hd_net_encap TCID 10 has no DSP
10:31:36 83529497mS PRN:
10:31:36 83529497mS SPY: 0083529497 - DIM config_hd_net_encap TCID 10 has no DSP

 

[vzb1x5]

looks to be a hardware failure.

10:31:36 83529494mS PRN: VCM DSP device failed, slot 1, device 1, core A, error count 5
10:31:36 83529496mS PRN: VCM DSP device failed, slot 1, device 1, core B, error count 2

what is in Slot 1, looks like it needs a physical re-seat, if re-seating doesn't clear it up, try replacing that module.

RAllen, IT Architect, the Power of We