Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

IP dect base station synchronization

Status
Not open for further replies.

anonymed

Programmer
Dec 18, 2012
17
Hi all,
I want to make an ip office solution for an entreprise located on a building composed from 6 floors, and they need an IP dect solution so we have a problem with inter-floor IPBS synchronization because it is an Air sync.
I ask if there is a solution to get an IP synchronization for example or other if possible.

Thank you all.
 
Do a DECT measurement, take a DECT basestation and a handset and go trough the building and measure the coverage of the DECT basestation within the building until full coverage has been found.
Read the DECT survey guide and follow the golden DECT rules:
- No basestations within 5 meters
- Air sync will stop if signal gets below -90 dB
- Handover starts at approx -62 dB
- Basestation at 2 - 2,3 mtrs height
- Not mounted on RF reflecting material
- know your stuff and if you don't, hire someone who does, it is harder then it looks


A simple mind delivers great solutions
 
Intrigrant is right.
I think that Dect is one of the hardest parts of telephony.
When it is implemented the right way then it is great but if not then all kind of weird problems occur.
Hire somebody with the right knowledge and you will be fine.
Where are you from? perhaps somebody here can help you out.


BAZINGA!

I'm not insane, my mother had me tested!

 
I will install two IPBS in two diifferent floors and i will test and tell you about the result.
Thank you all :)
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top