I have a customer who has a BCM400 who would like to extend some lines through a channel bank. My question is how do I assign a number to a trunk on a T1? Currently we have a T1 built and interfacing a channel bank, but am not seeing where I can have certain numbers hit a a specific channel? Thanks in advance.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
interfacing a channel bank?
- Thread starter lmman
- Start date
A T1 is 24 channels, the phone company can digitally cross connect 24 Trunks to the T1. A newbridge channel bank before the BCM T1 can breakout some or all of the 24 channels.
ISDN PRI 23 + D can have equipment between to drop out some channels the same way if you want to use it as your internet provider or other data.
ISDN PRI 23 + D can have equipment between to drop out some channels the same way if you want to use it as your internet provider or other data.
- Status
Similar threads
- Locked
- Question
- Locked
- Question