I have an ASA running 8.2.2(4) that is connecting us to our partner thru a private WAN.
We have an application that requires unique addresses for each user.
I would like to create an NAT pool on the outside that will only translate when reaching the service and not for everything else.
The parnter connecting to us is using PAT, they are all coming from the same address. I know it's possible I just can't figure out how to write up the policy.
Here is an example:
Source 192.168.1.1
Destination 10.10.10.10 port 12345
Want to assign each connection their own IP address inbound to the 10.10.10.10 address.
Any help would be greatly appreciated.
We have an application that requires unique addresses for each user.
I would like to create an NAT pool on the outside that will only translate when reaching the service and not for everything else.
The parnter connecting to us is using PAT, they are all coming from the same address. I know it's possible I just can't figure out how to write up the policy.
Here is an example:
Source 192.168.1.1
Destination 10.10.10.10 port 12345
Want to assign each connection their own IP address inbound to the 10.10.10.10 address.
Any help would be greatly appreciated.