acewarlock
Technical User
How would I connect a i2050 softphone to a BCM from home using my Cable IP connection?
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Chriss Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
i2050 connection to a BCM
- Thread starter acewarlock
- Start date
- Status
endlesswinter
IS-IT--Management
software vpn connection! Cisco Pix I have used in the past!
- Thread starter
- #3
acewarlock
Technical User
endlesswinter could tyou give alittle more info please.
You need to build a vpn between your home and work. This can be done via either hardware or software and is going to depend on how your network on the work side is set up for vpn's. Once the vpn tunnel is working you can then work on getting the i2050 to work. This will involve getting the proper protocols and ports allowed through the vpn in both directions. You should be able to get it to work, I once played around with an i2004 and got it working through cable.
- Status
Similar threads
- Locked
- Question
- Locked
- Question
