hp laserjet 3380 ghosting

[mdm01]

Hi guys I am working on a hp laserjet 3380 that is ghosting or residual image from a previous print. I allowed a paper jam between the fuser and the drum unit and it appears that the ghosting happens before the fuser.
Any suggestion would be appreciated.

Thanks.

 

[greif1]

Could be bad, this is often a fuser roller going bad.
Some good info at;

http://www.fixyourownprinter.com/reference/guides

Some guys that know more than me can tell you which roller based on the exact distance between repeats (I have seen this in usenet forums)
gr