HOW WOULD I ROUTE VM FROM A SITE THAT HAS TO GO THROUGH ANOTHER PBX?

[PRITelcom]

I have Intuity Audix v 4.7, Definity prologix

Below is how i route calles to VM between 2 of my sites.
------------------------------------------
Let’s say I have a station at the remote building x2028
x2028 goes to coverage path 4
cover path 4 goes to a hunt group 99.
Hunt group 99 goes to group extention 2900
Then under udp the 29xx goes to udpcode221 (main pbx where the audix is located)
------------------------------------------------------
HOW WOULD I ROUTE VM FROM A SITE THAT HAS TO GO THROUGH ANOTHER PBX?



Any insight will be most appreciated

 

[orypecos]

Is the remote hunt group set up for "remote audix"?

 

[PRITelcom]

Yes it is setup, but for some reasom VM will not pickup.

 

[bwilch]

You have the hunt group extension of 2900 pointing over the UDP... but what about the members of the hunt group? Do you have your UDP pointing those to the main site as well?

 

[orypecos]

There are no members of a remote audix hunt group.
If u call the hunt group directly does it answer? "please input the extension of the person that u are calling

 

[PRITelcom]

I have vm picking up now, (Thanks for your help) but message lights will not light.

Any ideas?

 

[PRITelcom]

I Have now updated my intuity to 5.1 - msg waiting lights still will not light