How to enable VPDN on outside interface (PPPoE)

[Tsmith01]

Hey guys,

I need an advise from you. I am trying to set up the VPN on a Cisco PIX 506, but it's giving me an error at the end of the VPN wizard.
ERR: vpnd enable outside
CAN NOT ENABLE VPDN ON THE SAME INTERFACE AS PPPoE

On this PIX, I only have two interfaces. E0 and E1.
Ethernet 1 is configured with PPPoE (DSL)(x.x.x.158)
Ethernet 0 is the internal interface (10.0.17.254)

What am I doing wrong? I can't figure it out. Could you please tell me how to enable VPDN on the outside interface?
I would really appreciate your help. I am new to this Cisco PIX routers. I would like you to give me some instructions on what I should do.
Thanks,
Tom Smith

 

[NetworkGhost]

You will have to a IPSEC vlient VPN. You can not do a pptp client based VPN when using PPPOE on the Pix.

 

[Tsmith01]

Thanks NetworkGhost for your prompt response. By any chance do you have any documentation on how to set up IPsec
on a PIX..