How to configure 2 inside subnets in pix 515

[MontrealSoft]

Hi,
The subject is quite descriptive.
I am trying to configure a pix515 from scratch. I got in the ASDM 6.0 and configured everything, but since I have t 2 inside subnets to take care of, I am now puzzled, since I can't find where I can specify it in the interfaces setup...

Thanks to whoever can help me !!


MontrealSoft.com

http://www.montrealsoft.com

 

[garnetbobcat]

Do you mean you have two subnets that are on two separate VLANs (one subnet per VLAN)?

If so, you need to configure subinterfaces on the ASA. One subnet can be on interface "inside" and the other one can be "inside2" or whatever you want to call it.

http://www.cisco.com/en/US/docs/security/asdm/6_1/user/guide/ifcs.html#wp1064542

http://www.cisco.com/en/US/docs/security/asa/asa80/configuration/guide/intrface.html#wp1044006

Matt
CCIE Security

http://www.wr-mem.com

 

[MontrealSoft]

I am using colocation.
I have ONE vlan (the provider sends me all my traffic on one IP, configured as the external IP of my pix).

Then internally I have 2 sets of IP addresses with machines on those IP. Those IP are the sames I have on the internet.

Thanks for any help.

MontrealSoft.com

http://www.montrealsoft.com