How can I x-port 4610SWs

[MCP2000]

Is there something that I am missing? We have a station that someone has activated SOMEWHERE, that we need to activate on the correct set. When we try a "ch st xxxx," we can't change the port to "x" so that we can activate elsewhere.

Does anyone know how we can do this? I really DON'T want to remove and add a station any time this happens. Thanks for the help!!

 

[huffer]

Did you try to activate the extension on the correct set anyway? By activating it on the correct set you might deactivate it on the other one... Worth wile trying?

 

[steco1958]

MCP2000 sorry to say but you can't X port a 46xx series set, it is IP, if you need to remove the set to disconect the number, just follow the normal programming command "rem st "

All the best

 

[nohuhu]

MCP2000,

if you want to block this extension, just change its security code and do busyout/release station. upon receiving release request the phone will reboot but will be unable to register with gatekeeper because security code was changed.

 

[lopes1211]

busy it and release it. Port will change to X.

-CL