FXO Paging

[danthephoneman]

Hi All,

Does anyone have any recomendations for the voice-port settings on a 2821 to use as a page port? I am connecting to a bogen amp thru a WMT1a.

 

[MrNick0483]

There is usally not much to configure on the port itself, start with setting it as a ground start and configure your route patterns.

 

[devtrue]

I have it setup using plar mode with [tt]timing hookflash-out[/tt] set to 50, but I'm not sure if you can set up plar connections on the 2800s

I'm going from a 3845 to a Valcom that was originally used with an analog PBX.

 

[danthephoneman]

Got it to work with valcom v-2003a. No problems

Thanks for the feedback.