Firmware OpenStage 60 V3 1

[pabloalcantara]

Hi, I´m trying to configure an OpenStage 60 sip phone on my asterix server, the problem is that the firmware I have is not compatible with asterix, and because of this I need any firmware version >= V3.
I can´t download it from siemens, because I do not a contract.
Thanks

 

[sbcsu]

Have you tried registering at the portal
Link

 

[sbcsu]

Some info Here which may be of use

 

[pabloalcantara]

I tried to register, but it´s no good.
The other site that you sugest doesn´t have the firmware.
I need anu V3 versions, because V2 (that I have) is not compatible with Asterix.

Thanks for the quickly answer

 

[donb01]

I just downloaded SIP V3 for the 60 yesterday. I am totally done for this part of my day right now so I will try to remember to put it out in my cloud tomorrow and post a link here. I have some pretty big deadlines right now, so my apologies if I forget, but I will remember before too long if I do.

 

[pabloalcantara]

Many thanks dond01, I will wait anxiously.

 

[sbcsu]

Latest Link
Release Notes Link

 

[sbcsu]

Let us know how you get on
Good Luck

 

[pabloalcantara]

Thanks a lot sbcsu,
But the problem is how to upgrade that thing. I work with network equipament from at least 15 years, I´m venturing in voip world now, but I dind´t find a way to upgrade to this firmware. My phone is right now version R2 R1.16.0. When I try to send the file over "Transfer File-->Phone Application" it says wrog file..

 

[donb01]

I was trying to upgrade my HFA phone yesterday and it was not liking the .img file, so I thought I needed to burn it to a disk to get the file, but that didn't work. I know I never had any problems upgrading my optipoint phones, but those are .app files..... Sounds like you might be in the same boat. I just https: to the IP of the phone and use the web client to update usually.

 

[pabloalcantara]

I think that we need to do intermediary updates: The last for each Rx Vx release.
for example in my case that is the version V2 R1.16.0:
1) V2 R1.28.0
2) V2 R2.48.0
3) V3 R0.73.0
4) V3 R1.50.0

Althou it´s possible that we only need the V2 R2.48.0.

Sbcsu, it´s possible to give us any of those firmwares?
Thanks

 

[sbcsu]

I will check later,
Is the phone currently HFA and you want to change it to SIP ?

 

[pabloalcantara]

The part number shown OpenStage 60 sip.
So I think it's already sip. But I can't confirm, because it's used.

 

[sbcsu]

Can you first check to see if you have followed this procedure:

2.5.1 Migration from OpenStage HFA to OpenStage SIP
1. Load the SIP software to the phone.
2. Perform a factory reset.
3. Configure the phone as a new SIP device.

 

[TIgerV]

I place the firmware on a usb stick, plug it in and reboot the phone and it autoloads for me.

--TIger

 

[pabloalcantara]

Sorry sbcsu, I can´t find the processo to do this migration.

TIgerV, I tried that, but IT doesn´t work. I have to rename the update to some especific file name on the usb stick?

 

[TIgerV]

When you unzip the firmware, there are 2 files, a .bin and a setup file. The setup executes and installs the bin

--TIger

 

[TIgerV]

There can be no other files on the stick.

--TIger

 

[pabloalcantara]

The firmware I have exist only an .img file.

 

[pabloalcantara]

TIgerV, can you pass me the version you have? IT´s for the OpenStage 60 sip?