Disable external follow-me

[bb34nne]

Hi all!

Is it possible to turn off external/internal follow-me trough WinFIOL? I know that it is possible over the phone, with #22# or #21#, but if there is command for it I would appreciate that someone reply how to do this!

Thanks in advance

bb34nne

 

[SpitItOut]

You can disable external follow me, it's defined in CDIV parameter in KSEXI, KSCAC, EXTEI commands or You can disable it in extension categories - EXCAC,
in KSEXI, KSCAC commands (digital extensions),CDIV parameter - the second bit must be set to 0.
in EXTEI (for analogue extensions), CDIV parameter - the third bit must be set to 0.
in EXCAC (for categories) , CDIV parameter - the thirs bit must be set to 0.

 

[parnum]

If it's on and you want it turned off, end and reinitaite the extension, it loses all soft diverts

best parnum

 

[bb34nne]

@parnum: OK, only way to turn off ext follow me is to "EXTEE" or "KSEXE" extension, and then reinitaite extension. I thought that there is another way, like PEALC, just for ext follow me.

@SpitItOut: Thanks, I already know for CDIV parameter, I asked the wrong question. User already have permision for ext follow me.

bb34nne