DID

[jeromephone]

Can you assign a DID to and extension and then move it to another ext for instance did is 777-0104 sassigned to ext 104
I want to assign the did to ext 134. I know how to do this on IP office and NEC but am not sure how the whole DID assigning works.

 

[nuklhead]

On the Merlin Legend you renumber the extension to match the receive digits sent by the service provider. They are most likely sending 2 or 3 digits. to make both ring you could program a primary coverage button on the other extension.

 

[XrayboX]

if it's only a few DID's that need rerouting, you can use dial plan routing to strip 3 digits, and add the correct extension, or group ( in this case 134).
If it's a temporary situation,or you need both numbers to go to 134, then you can forward 104 to 134, or as nuklhead said, put a coverage button on 134 covering 104.


When Linux is Free and Open, who needs Windows or Gates?