Detailed steps on adding/deleting features from Keys 2

[Merkery]

Greetings,

As you can tell, I'm new to this. The previous owner has left for greener pastures and training isn't on the horizon (yet.)

So, I need to act the ACNT thing to key 5 on some 3904s and remove it on others and of course, I have no clue.

So, any help is appreciated, and please, as detailed as possible would be even better.

Thanks!

 

[bhassell2000]

that is kinda complicated in my opinion, I never like to CHANGE an ACD set. I was always told it causes some corruption, so I personally would prt the TNB to see whaat it has on each key then deacquire it if you have CC and then out it and rebuild it with the desired keys, others may have a different opinion

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[bhassell2000]

but, to change you go to LD 20

req chg
type 3904
tn x x x x (what ever your TN port is
easy chg yes
key 5 acnt

or key 5 nul (to remove)

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[GHTROUT]

I say do it in LD 11 so you can follow along in the books. There is no documentation on changing keys in the LD 20 section.

--
Nortel Resources at GHTROUT.com World Famous!
--

 

[bhassell2000]

good point, Once you learn the commands they work in both LDs but to learn and follow in the book LD 11 id a good idea

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[GHTROUT]

Easy for us - we have them all memorized

--
Nortel Resources at GHTROUT.com World Famous!
--

 

[bhassell2000]

so gene, are you one of the "its ok to change an ACD but not MOV" or are you the other way around?

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[GHTROUT]

Change if Disabled. But MOV is here:

http://www.ghtrout.com/files/Dont_MOV_ACD.html

The books don't speak to CHG. I just make sure I can reload I guess. If that is impossible, I would OUT.

--
Nortel Resources at GHTROUT.com World Famous!
--

 

[bhassell2000]

I agree!

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell

 

[DFKSydney]

A possible word of warning:

If this is an ACD set, and the ACNT key is being used, it sounds like Symposium / CCx is active.

Deacquire before any changes.

 

[Merkery]

What are these books you speak of? A link, if they are on-line would be much appreciated.

What's the best practice?

Again, there are some phones I have to add the ACNT key, and key 5 (as far as I can tell) isn't occupied, see below:

KEY 00 ACD 6290 0 6158
AGN
01 NRD
02 MSB
03 SCR 55263 0 MARP
CPND
NAME Ralph Kramden
XPLN 15
DISPLAY_FMT FIRST,LAST
04 SCR 2263 0 MARP
05 ADL 12 3
06 ADL 12

Again, thanks for your time!

 

[bhassell2000]

In your example your key 5 has an autodial on it

go to

http://www.ghtrout.com/micromerl/index.html

for an online copy of books. Gene's site is very helpful and alot of other stuff can be found at

http://www.ghtrout.com/

Thanks,

Buddy

Linked in Profile

http://www.linkedin.com/in/buddyhassell