Copy Files To LPAR's

[ShubhenduP]

Hi,
I my environment we have a HMC V7 R3.3.0 which is managing few LPAR's.

Issues is due to some networking issues these LPAR's are not accesable on network & we have to get some information from those LPAR's using scripts.For that we will have to run the scripts in all LPARS managed my the HMC.

Requirement is how one can copy those scripts or files to the LPAR's by physically going into the DataCenter.

Please need an urgent attention in this respect.

Looking forward for quick solutions.

Thanks.
Shubhendu Pyne

 

[khalidaaa]

Since you don't have networking, i don't think that you will be able to do dlpar! what i had in mind is that you copy the data you need to a CD and then dlpar the CD drive into the lpars!

You can do this manually by assigning the partition the CD drive and then remove it and assign it to another partition and so on!

My info is a bit rusty about whether the CD drive will be added without a reboot since the networking is not there!

Regards,
Khalid

 

[khalidaaa]

You only need to have communication with your HMC to do a DLPAR:

http://www.ibm.com/developerworks/systems/articles/DLPARchecklist.html

Regards,
Khalid

 

[svnhunix]

I don't know how many and how large the scripts are, but maybe you can copy/paste them through the console if it are not to many/large scripts?

I thought you do needed network connection for dlpar since one of the tests is to ping the HMC from your lpar.

 

[DukeSSD]

You do need a hmc to lpar network for dlpar.

If there is no hmc to lpar network you could change the profile and then reboot the lpar to pick up the new resource.

 

[p5wizard]

[ot]And how dynamic is that LPAR change then? ;-)[/ot]

HTH,

p5wizard

 

[DukeSSD]

Sorry p5wizard, I do not understand your post, please explain in more detail what you mean.

Please include viable code tags, software version and release and a working example.

Thanks.