I have setup BGP and OSPF inside my network. I am consistently dropping a packet to my last hop when I do a traceroute for example
If i trace to my outside interface it will drop one packet out of three in the trace response.
If I move in and trace to sa and ethernet interface of another router inside my network further it will also drop one packet out of the three for the trace.
Is there something configured wrong here possibly
Here is my BGP and OSPF configs
router ospf 1
log-adjacency-changes
redistribute connected subnets
redistribute static subnets
network 66.x.x.0 0.0.63.255 area 0
!
router bgp xxxxx
no synchronization
bgp always-compare-med
bgp log-neighbor-changes
bgp dampening
network 12.x.x.0 mask 255.255.252.0
network 12.x.x.0 mask 255.255.255.0
network 66.x.x.0 mask 255.255.224.0
network 66.x.x.0 mask 255.255.255.0
network 67.x.x.0 mask 255.255.252.0
neighbor 63.x.x.81 remote-as xxx
neighbor 63.x.x.81 ebgp-multihop 255
neighbor 63.x.x.81 route-map xxxx-Out out
neighbor 66.x.x.2 remote-as xxxxx
no auto-summary
Any advice would be apreciated.
Thanks
If i trace to my outside interface it will drop one packet out of three in the trace response.
If I move in and trace to sa and ethernet interface of another router inside my network further it will also drop one packet out of the three for the trace.
Is there something configured wrong here possibly
Here is my BGP and OSPF configs
router ospf 1
log-adjacency-changes
redistribute connected subnets
redistribute static subnets
network 66.x.x.0 0.0.63.255 area 0
!
router bgp xxxxx
no synchronization
bgp always-compare-med
bgp log-neighbor-changes
bgp dampening
network 12.x.x.0 mask 255.255.252.0
network 12.x.x.0 mask 255.255.255.0
network 66.x.x.0 mask 255.255.224.0
network 66.x.x.0 mask 255.255.255.0
network 67.x.x.0 mask 255.255.252.0
neighbor 63.x.x.81 remote-as xxx
neighbor 63.x.x.81 ebgp-multihop 255
neighbor 63.x.x.81 route-map xxxx-Out out
neighbor 66.x.x.2 remote-as xxxxx
no auto-summary
Any advice would be apreciated.
Thanks