Connect three CS1000 without NRS

[pasesanchez]

Hi,

Do you know if is it possible to connect three CS1000 without use NRS, but using IP trunks.

Thanks.

 

[phonz1]

nope.... NRS does the rotuing of those calls...

 

[Triton101]

You would have to convert your MC cards to ITG Trunk and use OTM / TM to program.... not worth the hassle. NRS is wayyyyy better....

The problem is that VDCH goes to the NRS to find the endpoints... so without it your PBX can't figure out the IP of the far end....

__________________________________________________________
Find a job you love and you'll never work a day in your life. - Confucius

 

[bignose21]

For Virtual Trunk you need a sig server unless as above you are using ITG. If you have a Sig Server you have an NRS.

 

[MossEng]

As mentioned by Triton101 you would have to convert a Media Card to an ITG and use OTM / TM to configure it. It is possible to have a Sig Server for IP phones, while using OTM to manage ITG IP trunks, as I have a customer who does this, dont ask me why