Hello Techies!
Ok, here is what I have:
Compaq Smart Array 3200 Controller in a self-built server
OS = Windows 2003
Sun D1000
12 Sun 36 gig Hard Drives
The D1000 is set to have IDs 0-5 in the left bank and 8-12 in the right bank with the box ID at 6. The D1000 is also set to wait for SCSI command to power on the drives (I did try with the drives just powering up when the D1000 turns on as well.)
Problem-- When the system boots the 3200 goes through its motions and then states that no drives are found. I have ACU software installed and is detects the controller at Slot 3. The latest Windows 2003 drivers are installed as well. The controller, no matter what I do will not see the drives.
Any advise would be awesome.
Thanks!
Ok, here is what I have:
Compaq Smart Array 3200 Controller in a self-built server
OS = Windows 2003
Sun D1000
12 Sun 36 gig Hard Drives
The D1000 is set to have IDs 0-5 in the left bank and 8-12 in the right bank with the box ID at 6. The D1000 is also set to wait for SCSI command to power on the drives (I did try with the drives just powering up when the D1000 turns on as well.)
Problem-- When the system boots the 3200 goes through its motions and then states that no drives are found. I have ACU software installed and is detects the controller at Slot 3. The latest Windows 2003 drivers are installed as well. The controller, no matter what I do will not see the drives.
Any advise would be awesome.
Thanks!
