Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Clock controller 2
- Thread starter tommre
- Start date
acewarlock
Technical User
What system?
What Rls?
What Card?
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
What Rls?
What Card?
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
acewarlock
Technical User
Way do you want to move it?
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Thread starter
- #4
-
1
- #5
acewarlock
Technical User
To get Rls
LD 22
REQ iss
----------------------------------------------------------
Are you replacing the card in loop 2 with another card?
It would help if we why and what your doing.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
LD 22
REQ iss
----------------------------------------------------------
Are you replacing the card in loop 2 with another card?
It would help if we why and what your doing.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Thread starter
- #7
acewarlock
Technical User
That doesn't make any sense what your saying, if your removing the site way do you need to move it to another T1?
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
acewarlock
Technical User
Yes, but were all making ASSUMPSIONS, let's get the facts so we can give the right answer and stop guessing.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Thread starter
- #13
OK the T1 was a phone link for inter office communication. Not an incomming T1 from the CO. We are using an adtran to split the data and voice. That line no longer needs phone traffic. Our vocie traffic to that site is now VOIP. I want to diable the card and move the clock controller to another remote site's T1. Hope this clarifys things.
-
1
- #14
tnphoneman
Vendor
Just like phonz1 said with a few changes. nothing major.
1. Disable the clock card LD 60
2. disable the loop 2 and 3 LD 60
3. LD 73 change the DDB PREF prompt to 3
4. Swap the T1 cards in slots 2 and 3
5. Enable the loop 3 LD 60
6. enable the clock card LD 60
If you have a MSDL Dchannel daughterboard you will have ot redownload this.
1. Disable the clock card LD 60
2. disable the loop 2 and 3 LD 60
3. LD 73 change the DDB PREF prompt to 3
4. Swap the T1 cards in slots 2 and 3
5. Enable the loop 3 LD 60
6. enable the clock card LD 60
If you have a MSDL Dchannel daughterboard you will have ot redownload this.
acewarlock
Technical User
Bad questions get bad answers.
Every question needs a few things so we aren't making a lot of guess's and Assumptions
Make, model and software Rls. Don't tell us how you want to do something, just tell us what you want to do and we will try to give you the right answer. this should have been an easy question and answer.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
Every question needs a few things so we aren't making a lot of guess's and Assumptions
Make, model and software Rls. Don't tell us how you want to do something, just tell us what you want to do and we will try to give you the right answer. this should have been an easy question and answer.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
acewarlock
Technical User
I didn't see it as an easy question and I was the first person answering the question and I don't feel comfortable giving answers if I'm not sure what the person really wants to do as there may be serveral way's to do something and I want to give the best answer I can. I try not to Assume anything, thats why I ask for more info.
You gave him a good answer based on your Assumption which was a good one. but I always say when you ASS-U-ME
Good answers phonz1 and tnphoneman, have stats on me.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
You gave him a good answer based on your Assumption which was a good one. but I always say when you ASS-U-ME
Good answers phonz1 and tnphoneman, have stats on me.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
acewarlock
Technical User
That was Stars not stats
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
This is a Signature and not part of the answer, it appears on every reply.
This is an Analogy so don't take it personally as some have.
Why change the engine if all you need is to change the spark plugs.
- Status
Similar threads
- Locked
- Question
