CLI presentation to NTL Telewest

[mgedrych]

I'm having trouble getting a BCM400 to present CLI to an NTL Telewest exchange over PRI. Their support team tell me that I need to send 10 digits with national dialing plan. In Elements Manager under Telephony / Dialing Plan / Public Network I've got Public Received Number Length set to 10 and Public Network Dialing Plan set to National. No joy. Anyone know whether there are any other settings that I need to change? Is there a way to monitor what the BCM is sending to the exchange to try to diagnose the problem?

 

[cook1082]

Under each phone there is something called OLI public enter the 10 digit number you want to go out.

 

[dwpoole]

In the BCM Monitor, there is a UIP tab. This tool will let you monitor in real time infomation being sent out on the DCH.

 

[mgedrych]

cook1082: I forgot to mention that I had entered the 10 digit number that I wanted to be presented into the OLI Public field for each extension.

dwpoole: Thanks for the tip about UIP. If only I knew about that a month ago I could have saved a whole load of grief!

The problem has been resolved. It looks like I needed to perform a reset after having changed the Public Network Dialing Plan from its old setting. Many thanks for your help.