Apr 24, 2007 #1 Mbadley MIS Mar 19, 2007 9 CA Hello. I am trying to change a DN from the GUI but cant seem to find where to do it. Could someone please post how to do it? Thanks.
Hello. I am trying to change a DN from the GUI but cant seem to find where to do it. Could someone please post how to do it? Thanks.
Apr 24, 2007 #2 bfitz8339 Vendor Jan 17, 2007 66 US Have you tried to go through tel-net(telephone) programing Upvote 0 Downvote
Apr 24, 2007 #4 acewarlock Technical User Sep 16, 2002 9,370 US If your at the site move the crossconnect. unless you keep very good records what DN is on what port, it can get very complicated Upvote 0 Downvote
If your at the site move the crossconnect. unless you keep very good records what DN is on what port, it can get very complicated
Apr 24, 2007 Thread starter #5 Mbadley MIS Mar 19, 2007 9 CA I am off site. It is a BCM400 Rls. 3.5 Just need to know where in on the GUI i need to make the change since i cant do it from the active DN list. Upvote 0 Downvote
I am off site. It is a BCM400 Rls. 3.5 Just need to know where in on the GUI i need to make the change since i cant do it from the active DN list.
Apr 24, 2007 #6 biv343 Systems Engineer Apr 14, 2005 3,639 US Click on Telephony Services, General Settings, then click Configuration (top of the browser window) then change DNs. Upvote 0 Downvote
Click on Telephony Services, General Settings, then click Configuration (top of the browser window) then change DNs.
Apr 25, 2007 Thread starter #7 Mbadley MIS Mar 19, 2007 9 CA biv343 - that's it. Thanks a bunch. Upvote 0 Downvote