Can't ping Remote LAN

[igolo]

On a new DSL-to-Frame Relay install I cannot ping the IP of the Remote LAN. I can ping the remote WAN. So the WAN connection is working.
The router on the host site is Cisco 3640 and the router on the remote side is a Netopia 5100.
I also need to be able to ping the devices behind the remote router.

 

[jeter]

What routing protocol are you running if any?
Or did you setup a static route example
routerA ethernet 172.16.1.1/24
routerB ethernet 172.16.2.1/24

router A ( ip route 0.0.0.0 0.0.0.0 172.16.2.1 )
router B ( ip route 0.0.0.0 0.0.0.0 172.16.1.1 )

You can type ( show ip route ) to verify connections. Jeter@LasVegas.com
Fisher CCNA
Sprint-Data

 

[igolo]

I found the problem; the ISP configured the remote router with the incorrect LAN IP.
Sorry for the pre-mature post.

 

[jeter]

well that would do it !!! Jeter@LasVegas.com
Fisher CCNA
Sprint-Data