Call Forwardid Off-Net on Mitel SX-200

[xharryooo]

Can the Mitel SX-200 be programmed to allow call forwarding off-net or what are the codes to do this

 

[kwbMitel]

You'll have to clarify what you mean by off net.

**********************************************
What's most important is that you realise ... There is no spoon.

 

[xharryooo]

I want to call forward an Ext to my cell phone

 

[kwbMitel]

Ah, ok then

First you need Call Forward External in the COS of the station
Then you need Trunk to trunk COS options in the trunk COS (in 313-319 range)
Then you need Device Interconnection for the trunks (form 30)
I belive there may be a system option 21 or 22 for external forwarding (not sure)

Assuming all programming is in place to allow forwarding external.

Create a speedcall on the system either on a line key of the phone or as a system speedcall in form 31

Use superkey (or FAC) for forward always and then press the speeddial key (or system code)


**********************************************
What's most important is that you realise ... There is no spoon.

 

[xharryooo]

Thank you very much I will let you know if I have any questions!!