Bypass dialing 9.. PLEASE HELP!!

[somuch2much]

I am trying to bypass the need to dial 9 when making an outside call on certain analog lines . I know it can be done. Can someone give me a break down?

 

[KCFLHRC]

Make the TGAR on the phone a 0 and have them dial the ACOD to the route.

 

[somuch2much]

I found this in an older thread..
build an xlst that has
0-9 thru
9-99
this is built as scl xx and assigned to xlst of the phone.


To anyone else about this solution: you have to build the SCL in LD 18 and also associate it with an XLST by defining a "pretranslation group to speed call list" in LD 18
TYPE pre
XLAT 9 PRE 9 <-- if using SCL 9 to do the translation
XLAT 0 PRE 2 <-- must define the default pretranslation group in order to turn on the pretranslation feature (in LD 15, PREO=1). I used SCL 2 (an empty SCL) in this example because SCL 0 is already built and in use for regular speed call dialing.

how do i build an xlst and input 0-9 thru 9-99??

 

[GHTROUT]

Here: [URL unfurl="true"]http://www.ghtrout.com/files/Dial_Without_the_9.html[/url]


~~
Gene at GHTROUT.com

 

[Firebird Scrambler]

As stated above, Pre Translation is the best way of dialling out without the use of the AC1 code usually "9"!.

This is old, but should still apply.

PRETRAN.TXT
CONFIGURATION OF PRETRANSLATION TABLES OPTION 11 18.40H
>LD 18 08/05/1996
REQ NEW
TYPE SCL
LSNO 0
DNSZ 4
SIZE 10
WRT (ADDS: MEM: 17 DISK: 0.0)
STOR 0 0
WRT
STOR 1 1
WRT
STOR 2 2
WRT
STOR 3 3
WRT
STOR 4 4
WRT
STOR 5 5
WRT
STOR 6 6
WRT
STOR 7 7
WRT
STOR 8 8
WRT
STOR 9 9
WRT
STOR

REQ NEW
TYPE SCL
LSNO 1
DNSZ 4
SIZE 10
WRT (ADDS: MEM: 17 DISK: 0.0)
STOR 0 0
WRT
STOR 1 1
WRT
STOR 2 2
WRT
STOR 3 3
WRT
STOR 4 4
WRT
STOR 5 5
WRT
STOR 6 6
WRT
STOR 7 7
WRT
STOR 8 8
WRT
STOR 9 9
WRT
STOR

REQ NEW
TYPE SCL
LSNO 2
DNSZ 4
SIZE 10
WRT (ADDS: MEM: 17 DISK: 0.0)
STOR 0 90 ######## (Making the phone dial 90 when "0" is pressed!.
WRT
STOR 1 1
WRT
STOR 2 2
WRT
STOR 3 3
WRT
STOR 4 4
WRT
STOR 5 5
WRT
STOR 6 6
WRT
STOR 7 7
WRT
STOR 8 8
WRT
STOR 9 9
WRT
STOR

REQ NEW
TYPE PRE
CUST 0
XLAT 0
PRE 0
PST
SDA
XLAT 1
PRE 1
PST
SDA
XLAT 2
PRE 2
PST
SDA
XLAT
REQ ****

>LD 15
REQ CHG
TYPE CDB
CUST 0
DLDN
TO
CHLN
PREO 1 --------------------------------------- CHANGE TO "1"
FCAF
DASC
ROPT
REQ ****

>LD 11
REQ NEW
TYPE 2616
TN 20 0
DES AAA
CUST 0
AOM
FDN
TGAR
LDN
NCOS
RNPG
SSU
XLST 2
SCPW
SGRP
CLS
HUNT
SCI
AST
IAPG
KEY 0 SCR 2400
MARP
KEY

REQ ****



All the best

Firebird Scrambler
Meridian 1 / Succession and BCM / Norstar Programmer in the UK

http://www.linkedin.com/in/davidbromley

If it's working, then leave it alone!.

 

[somuch2much]

IT WORKS!! Thank you guys so much