BC11 BRI-Qsig parameters

[rightsaidfred]

Hi All,

Could you tell the exact parameters for BC11 VARI, VARC, VARO and ADC for an interconnection with a CISCO router?
MD is user and signalling is QSIG.

Thank you!

 

[whosrdaddy]

what cisco router do you have? (eg 2610,...)

for most cisco voip routers, there is a detailed document how to configure the md110 on their website.

--------------------------------------
What You See Is What You Get

 

[rightsaidfred]

It is a 2610.

 

[whosrdaddy]

then,
for example this document describes connection between MD110 BC12 and cisco 2611 (BC12 RODAI params should be ok for BC11)

http://www.cisco.com/application/pd...ps4830/c1237/ccmigration_09186a00803704f5.pdf

--------------------------------------
What You See Is What You Get

 

[rightsaidfred]

Thank you very much.

 

[rightsaidfred]

It is for PRI/E1 interface.
Are the parameters same as in case of BRI interface?

 

[whosrdaddy]

yes, only difference is D8 of VARC parameter, which should be 4 instead of 0

--------------------------------------
What You See Is What You Get