Trunking (802.1q) - allows multiple VLANs through 1 port - tagged VLANs - utilises Ingress and Egress and PVIDs.
switchport mode trunk (may require 802.1q as well)
switchport trunk allowed vlan (VLANs required)
Also a good idea to set a native VLAN on a trunked link.
Reamin positive. The affect on those around you will amaze.
To set the interface type, use the switchport mode command. To reset the mode to the appropriate default mode for the device, use the no form of this command.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.