Hi,
This is my first post and hope ill get some good answers. I have w 4507's and 1 2950, the problem is that servers on 2950 have a small amount of packet loss like 2000 packets sent 1 or 2 loss. I can not have that. The only problem i could saw is that i see some CRC errors and Input errors that the server is on.
4507 City-Fiber Connection>>> +4507 fiber to 2950....
this is the current setting please help thanks ?
sh int fa0/3
FastEthernet0/3 is up, line protocol is up (connected)
Hardware is Fast Ethernet, address is 0014.a85b.8443 (bia 0014.a85b.8443)
Description:Server 20
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 28/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, media type is 100BaseTX
input flow-control is unsupported output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 7000 bits/sec, 5 packets/sec
5 minute output rate 11046000 bits/sec, 980 packets/sec
32284072 packets input, 2318079625 bytes, 0 no buffer
Received 134372 broadcasts (0 multicast)
0 runts, 0 giants, 0 throttles
34 input errors, 34 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 123280 multicast, 0 pause input
0 input packets with dribble condition detected
179374132 packets output, 2393906010 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
all it has on that port
switchport mode access vlan 2
thats it. and thats how it was for 1.5 year never had any problems
i even swap the 2950
This is my first post and hope ill get some good answers. I have w 4507's and 1 2950, the problem is that servers on 2950 have a small amount of packet loss like 2000 packets sent 1 or 2 loss. I can not have that. The only problem i could saw is that i see some CRC errors and Input errors that the server is on.
4507 City-Fiber Connection>>> +4507 fiber to 2950....
this is the current setting please help thanks ?
sh int fa0/3
FastEthernet0/3 is up, line protocol is up (connected)
Hardware is Fast Ethernet, address is 0014.a85b.8443 (bia 0014.a85b.8443)
Description:Server 20
MTU 1500 bytes, BW 100000 Kbit, DLY 100 usec,
reliability 255/255, txload 28/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 100Mb/s, media type is 100BaseTX
input flow-control is unsupported output flow-control is unsupported
ARP type: ARPA, ARP Timeout 04:00:00
Last input never, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 7000 bits/sec, 5 packets/sec
5 minute output rate 11046000 bits/sec, 980 packets/sec
32284072 packets input, 2318079625 bytes, 0 no buffer
Received 134372 broadcasts (0 multicast)
0 runts, 0 giants, 0 throttles
34 input errors, 34 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 123280 multicast, 0 pause input
0 input packets with dribble condition detected
179374132 packets output, 2393906010 bytes, 0 underruns
0 output errors, 0 collisions, 2 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 PAUSE output
0 output buffer failures, 0 output buffers swapped out
all it has on that port
switchport mode access vlan 2
thats it. and thats how it was for 1.5 year never had any problems
i even swap the 2950
