Search results for query: *

Thanks Brian....

On a MICS w/PRI, I suspect a faulty Combo Card and would like to change it out by using a services card and a 6 port expansion card. Will I lose any programming? Thanks for your help.

Hawks, That's a good idea but still not sure if the power would be a problem or not. You may have to run it by Nortel. (Going to call them Nortel for as long as I can)

Hawks, Because of power limits, the BCM 450 will only allow 2 media cards in the main unit and 4 in the expansion unit.

Curlycord, I agree with what you say but the customer had a choice of 850.00 thru Qwest or 540.00 thru WCI. (They have loop start trunks now and would be changing to PRI.) We have to maintain the circuit and "consider all the points" you have made. Thanks Curlycord.

Thanks Dasheen and Support Dude, appreciate it!

I have a customer that is in an area with only two providers, one being Telco and another company that is about 400.00 a month less. This of course, is the company that the business wants to go with. This is all fine except that they claim that they can send "only 7 digits" instead of the 4 that...

Thanks KABUKI, appreciate the help!

To roll C.O. cards in a trunk module for testing, can you hot swap or is it best to simply "disable" the module first? Also, could you just power down the trunk module? For some reason I have had Norstars "default" lately.

Customer wants second 2250 console installed in hotel. Can I "copy" configuration from existing console after installation? Any help is appreciated.

Does each console require 25 pair? and can I "copy" from existing console programming? Any help would be appreciated.

Thank you for your help!

I have a Mics "non-expanded" with T-1/Did's and want to add a station module, will I lose 4 digit DN'S? Appreciate any help.

Ditto".

The GD mailbox was the first thing we looked at, we also rebooted the system. All operation, greetings, CCR tree and mailboxes at this point, work normal. Also read the other post on "disk full" last week and it seems my only recourse is to re-install the NAM. Thanks for all the help!

Just installed a NAM with a new hard drive replacement and am receiving "disk full" S1 @ receptionist station about every fifteen minutes. Tried to find a solution thru 915 but came up with nothing. Never saw this "error" before. Thanks for any response.

They don't have CLID John but I'm thinking it's a "timing problem" as Senk1s suggested, just haven't got back to the customer as yet. I will post if it's something interesting. Twoway

Thanks Senk1s, I'll do just that.

Senk1s Thought the same thing and called their carrier while on site to ask questions but they felt that all was good. It's a MICS 1.1 with T-1 set as E&M's, manual answer.

Set up a CCR tree for a customer and programmed trunk lines for "zero rings". When call comes in to the auto attendant, it answers with "one moment please, you have pressed an incorrect key" and then goes into the CCR tree. I moved it out to one ring and it works fine, (company greeting and CCR...