Search results for query: *

I've been taking care of a KX-TD1232 with a KX-TVS80 voicemail for a customer. We have been changing the custom service menu when adding and removing extensions. I had noticed that one day that there was no more access to the company greeting or Company name in the "modify messages" menu, it...

call blocking is off under AA status, call transfer status.

Call Blocking Connects the caller to the Incomplete Call Handling Service without ringing the subscriber’s extension." If this was on would the extension ring at all? I'm not sure I totally understand this feature?

Where is call blocking turned on and off?

Boot the system with the sd card and connect to it with manager. Make sure its in standard mode and reboot. Open the config with manager and go to file, offline, send config, push the config to it it will reboot then type in your licenses when it comes back up.

I have a system I'm working on it's a KX-TD1232 with TVS50 voicemail. We added a new extension to is a while back and setup a vm box for it. The message light will not illuminate on the phone.I swapped the phone with a known good one and the same issue. I went in the vm options 6-2-1 and made...

I forwarded it using 7105 to 165 on the phone and the light is flashing. If it wasn't forwarded it wouldn't go to voice mail on an internal call which it does. Unless I'm missing something?

I changed the Extension numbers on the ports using "003 extension number" I'm guessing it has something to do with the auto attendant not transferring it to voice-mail. The system is setup so that when a call comes in it goes to the TVS50 on 165 and plays the message saying to dial an extension...

I have a customer with a KXTD 1232 with a TVS50. They had a port going bad on the system where the phone would power off when it would ring so we moved the extension to an unused jack. I forwarded the phone to voice-mail on busy/no answer by using 7105165. The message was recorded and the voice...

Thats exactly what I did still says "co not assigned" but flashes when called.

So back to programming though the phone. I have the system setup with just one co line right now for testing, I have buttons 1 through 8 setup for co line 1-8. I can call into the system button 1 flashes and I can pick up the call. However when I try to make a call from line one I get "Co Not...

Every time I reboot the kx-td1232 I get "ATQ0E0V1S0=1X0&D0" and nothing else is this correct?

I'm not sure the vps I currently have is working, when I plug it in I just get a series of 4 flashes followed by a pause. I get nothing in the terminal but it may be the cable. As far as the phone system, the little programming I have done through the phone seems pretty straight forward and I...

I had opened up Hyper terminal (Tera Term since I'm on windows 7) to see if I get anything and didn't see anything I had gotten some random characters the fist time I plugged it in but figured that was just due to me pluging it in while it was on. Rebooted it several time after that and got...

I have KX-TD1232 that has been sitting around I'm trying to set up. I'm trying to do some programming using the Panasonic for Dealers Software I can connect but keep getting error code 91 every time. Is this a cable issue? It seems to be connected. Or is this and issue with the system/software?