Search results for query: *

Had a similar problem to this, where Abbrev dial numbers were being called. What are some of the extension numbers getting the calls? My guess would be extensions numbers with digits that are mostly 1's and 2's. A failing external cable on the property with analogue extensions attached was the...

Have had a few problems with AM radio before. We used .oo68 uF caps across the loop start PSTN lines for 1368 kHZ blocking, and .01 uF when the station changed to 666 kHz AM. Seemed to be effective in most cases. However a combination of 2 of the above caps with one leg of each attached to each...

Hi aleena7 I'm a bit slow on the reply here, but let us know if you have resolved the problem, and share some details with us if you have. You didn't say what software release you have but these commands may help. Cmd 2039 Music on hold after transfer. Cmd 0192 Multiple Music on hold source...

Just while we're talking 911 or triple zero, do you think it's a good idea to create a speed dial for the non-PABX user so that missing the trunk access code still gets them to the right place? ie, speed dial 911 = 9-911 for those that use it or speed dial 000 = 0-000 for where I am from. We...

Hello to all, I will be switching employers soon but until then don't have access to the AMC. I want to do a refresher on 3300 CXi and would like to configure this one as a bit of training. The Hardware Identifier from the Licence options and selection page is 00000003E90E. If someone can...

An old thread here but I just thought that I might add a comment... For analogue equipment, the ring detect circuit that hangs across the line in idle state has a series of resistive and capacative components. Using an ohm meter testing toward the "phone" the power from the meter momentarily...

I just had a thought with the problem described here. As a fax is sent via the Telco's network an echo cancelling device is removed from the call for fax and data transmissions. People don't like echo, because it causes us to pause and repeat while speaking, however, machines don't like echo...

Hi Bundy33, This may be way off the mark, but was a problem that I had with phantom calls to night extensions. The calls were happening at the local site and their head office. The calls were being presented to the night extensions, and the "on-call" staff. Why did the calls only go to those...

I have a DT590 rev R4D 2008W10. While trying to subscribe with the CXAKI command remotely the user entered the A/C pin I supplied and the subscription failed. A couple more tries just to make sure and we got the same result. Curious to find the reason I visited the site and the phone already...

Hi all, I don't think this is an issue with the hard drive. I suspect that it is a driver issue in Vista causing a problem with the nVidia graphics card. This problem is then causing grief with other hardware in the system. If preator1 has on-board nVidia graphics I would suggest chucking a...

I am not onsite and have no information handy so please bear with me if there are any minor errors. I just had a floppy disk in the second (right hand) drive fail on a working 9600M system. The system was down because it failed to boot into a running state (stalled during boot). Software is Rel...

endlesswinter is this possible. I thought had done this years ago. I have 2 faxes sharing the same phone line both used for outgoing faxes only, the problem is when you try to send out a fax the other machine recives it. ___________________________________________________________ Possibly...

Get yourself a cable stripper like the one that I use and stripping will be a breeze. This link has a picture. http://www.action-electronics.com/cat5e.htm If you are running the cables, end to end, then its a good idea to use two boxes of cable for double points, and three boxes for triples...