Search results for query: *

Hi, We have a internal emergency number (222) for first aid etc. Now we would like to see a alarm notification when then number is a called on the console. How to arrange this. 222 is a analogue number. thx Ruud

just had another call with the provider, and finally they told me that they are blocking it... thx

so for sofar it looks like the MITEL setup is allright?? So still probably is our provider blocking it? What's your opinion?

I'm getting confused now where it's setup that we block to outgoing number.

this is in the icp digit modification assignment Digit Modification Number Number of Digits to Absorb Digits to be Inserted Final Tone Plan/Information Marker 1 1 2 0

Hi, After 8 years we want to send an outgoing phone number. In the mitel nothing is setup, so that should be fine. Our provider tells me that they don't block it as well. Now we are still using an old release in combination with a universal nsu what needs to be programmed in IMAT. Here is a...

Hi, does anyone know IF it's possible to register a Mitel 5604 on a old mitel release 7.1.49 in combi with Openmobility Manager 2.6.2 I know that it's a real old version, but our current hardware does not support the latest firmware's. This is sheduled for next year ;-)

it's a (old) 3330icp. (7.1.4.9)

Hi, is it possible to get our internal analog emergency number (222) also to be visible on the attendant console when it's called as an emergency call? thx Ruud

Hi, that's indeed what I mean. Could you give me an example of such device?? Thx.

Hi Guys, related to a topic I posted last year regarding automatic conference. Do you now if there is a possibility to automatic pickup an analog phone. I have programmed a analog non busy extension and would like to use a separate phone for this. When persons call that specific number they...

Hi, I'm using a procurve 2910 switch in this case. this also only occurs on the new HP compaq Elite 8100. With older system with a gb interface, it hasn't occured in the past.

Goodmorning, Has somebody the same issues with when you connect a hp elite 8100 through a mitel 5220 the phone stops working/rebooting when the pc is turned on? Or does someone knows the solution for this? Thx

To RossBC, You did it!!! It was indeed that my DHCP server has an tagged VLAN 20 port! Switched it to NO and now it's working fine again! ps. I indeed put the DHCP server on the new switch a week or 2 ago.

When using the dhcp config tool. Do you I need to put in the hex?

I tried to switch back to option 128. But the same happens. "VLAN 20 PRIO 5 USING OPTION 128+" but then it boots again to "10.131.26.13 USING OPTION 128+" and it hangs.

Hi, when the phone is booting its telling "VLAN ID 20 PRIO 5" using option 125. And then the ip 10.131.26.* Then the phone hangs, or continues, but using the wrong ip.

Good day to everybody. I have some wierd issues. We have a separate vlan for our phones (VLAN 20) For end-users we use (VLAN 16) For It usage we use (VLAN 26) The switches are setup to use trunking (cisco) and tagged untagged (procurve) This normally worked perfect. I have setup option 125 on...

our current situation is a following. when somebody calls 222, an emergency signal goes off in the factory. A person from our first aid group calls then 223 and he is connected to the person who called 222. But we want that mulitple people can added automaticly to that call if nessesary. Is...

forgot to mention. We are running a 3300 icp with 7.1.4.9