Search results for query: *

you dont use the 8000 and 10000 when formatting a rsd, that is to load the os. just do vol format rsd XXXXX res then do your vol backup. so you dont mount it, then you just type vol backup sysuser on rsd then remember to reboot the controller after because it dismounts sysuser during the process

When you login, type the where or wh command. That tells you right on the maint screen what you are running. You should check your mfrd level in edocs to see what you are able to program. Do you have flexible dimensioning as an option? Just in case, just so you know, there is a form that you can...

once again your details lack. wrong forum for you my friend.

21785, Lt=Line side Nt=Network side. -Which do you need to be, the choice is yours. If you cannot establish layer 1 (flashing green) then toggle either lt or nt. The address control is irrelevant. It is part of the link descriptor when you chose isdn node as your integrated digital access. In...

21785, you really need to explain your issues better, i have seen many posts, and it seems that most of us reading the ones you put on do not explain what you have done so far, so it is difficult to give you pointers, it appears you are totally reaching versus trying to resolve things. for the...

use curfew control, and that will knock them off after x amount of time

I believe Shawn Kargol is the expert on this product. he seems to do all of the work on it

if it is not a callback, then pressing the message key will not work. use the mwi deactivate code from any set. if that doesn't work, restore your db

what database is corrupt? Are you saying that you have a database alarm? that is the key to knowing your db is corrupt. or are you speculating on this? Agreed that changing protocols with no intervention on co side makes zero sense. You sure do have a patient customer to work with on this issue...

Wow, you may as well delete your account on this site. You make it rather difficult to provide direction to your questions. Good Luck with your installs. c ya

what does it do or not do? Like the other person wrote, you have to explain what you see happening? They aren't the best, but if you are using your own dhcp, this should be simple. the installation guide tells you what the flashing or solid mwi, l1 or l2 mean. You should be able to figure out...

make sure that your loop start trunk doesn't have Ani dnis delivery trunk set to Yes. if it is, and you aren't getting caller id, you will have a delay for the actual answer point to start ringing.

Have you looked under the all maintenance and software logs around the times reported. Maybe it is something simple like a power issue, or duplicate ip address. You can look at logs through esm on your own accord

right out of the books.

It isn't supported in T steam. You need to be U03.9

It is not supported on either the SX2000 or the 3300 products. Same console can be used for 200's or 2k or 3300.

Sell them a Citel gateway, then they can maintain use of their norstar sets.

There is no reason you cannot use your 6.x,7.x,8.x database to go to rel 9. the rn states the forward migration process. restoring a higher level db than the os on the box just does not work, and is not worth putting time into

I've been told that the kpi only lists the ones that rnd hitlists for resolution, they change on a daily basis. not all defects make this list

ensure your interdigit timer is at it's lowest